Disclosure: Some links in this post are affiliate links. As an Amazon Associate I earn from qualifying purchases, at no extra cost to you. Learn more
Specs are compiled from manufacturer listings and verified buyer reviews and can change over time — please confirm the key details on the product page before buying.
If your TV sits above the fireplace, you already know the problem: you spend the whole movie looking up. A TV lift cabinet fixes that by storing the screen out of sight and bringing it down to eye level at the push of a button. The pick that suits most people is the MantelMount MM815 — a motorized mount for 45″ to 90″ screens with a remote that remembers two favorite heights. Below you’ll find seven real options, sorted by what each does best, so you can match one to your room instead of guessing.
This guide is built by comparing the manufacturers’ published specifications and the patterns across verified customer reviews, so you get each pick’s real strengths and trade-offs instead of marketing spin.
These units split into two families: mounts that lower a TV you already own, and lift mechanisms that raise a screen out of a cabinet. Know which one your room needs before you buy anything. Pick the wrong family and you’re boxing up a return instead of watching TV.
Top Picks
How To Choose The Best TV Lift Cabinet
Start with the ceiling height over your fireplace, not the TV size. A mount that lowers the screen 26 inches solves a neck-cricking living room. A lift that travels 39 inches solves a cabinet built into a tall wall. Get that travel number wrong and no amount of remote programming will save your viewing angle.
Travel distance decides whether you look up or straight ahead
The lift’s travel — the vertical distance the screen moves — is the number that fixes your posture. A short drop leaves the TV high. A long drop brings it near seated eye level. Measure from the bottom of your screen to where your eyes sit on the couch, then subtract. That gap is roughly what you need the mount to close.
Weight capacity and VESA pattern come before screen size
Screen size is a rough guide; the bolt-hole pattern on the back of your TV is the real gate. A mount rated for 200 lbs and VESA 200×200 up to 800×500 covers nearly every large set. Check that pattern on your TV’s spec sheet first. A lift with plenty of capacity still fails if its bracket holes don’t line up with yours.
Cabinet lift or a mount for the TV you own
A cabinet lift mechanism raises a screen out of a counter, cabinet, or boat console so it disappears when off. A pull-down or drop-down mount lowers a TV that already hangs above a mantel. Both hide the screen, but only one fits your wall. If you’re building furniture, buy the mechanism. If the TV is already up there, buy the mount.
Side-by-Side Comparison
| Model | Best For | Screen Size | Weight Capacity | Travel | Amazon |
|---|---|---|---|---|---|
| MantelMount MM815★ Best Overall | Living rooms with a fireplace TV | 45″–90″ | 115 lbs | 26″ vertical | Amazon |
| CABINETIZER Model 72Solo Installer’s Friend | Installing cabinets solo plus TV mounting | — | 300 lbs | 9″ to 72″ | Amazon |
| ONKRON TS1881E-B | Moving a big screen room to room | 50″–86″ | 200 lbs | 11.9″ range | Amazon |
| Touchstone 30009 | Kitchen cabinet and RV installs | 26″–50″ | 120 lbs | 28″ | Amazon |
| Whisper Ride 1000 | Large screens up to 75″ | Up to 75″ | 145 lbs | 39.4″ | Amazon |
| Touchstone 30010 | Mid-size screens with lots of travel | 32″–70″ | 120 lbs | 39″ | Amazon |
| Mount-It! Motorized Fireplace Mount | Flush in-wall finish above a mantel | 42″–80″ | 110 lbs | 24.8″ | Amazon |
Detailed Reviews
1. MantelMount MM815 Motorized Pull Down TV Mount
Our pick — 4.5+★ from 100+ verified ratings; the strongest balance of quality and price.
The motorized mount that brings your fireplace TV down to your eyeline and swivels to the party
The MM815 solves the looking-up problem in one move. It drops the screen 26 inches vertically and swivels 30 degrees left or right, so the TV swings toward wherever you’ve settled. It handles TVs from 45″ to 90″ anywhere from 20 to 115 pounds. That range covers most everyday living room sets.
The automatic drop with two memory presets is what wins people over. Press once and the TV lowers and swivels to where you programmed it; press again and it returns above the mantel. It uses an RF remote, meaning radio frequency — you don’t have to point it at anything. That matters when the receiver sits behind the TV. The build quality is the thing owners talk about most, and the centering mechanism swings the screen back to center as it rises so it clears the mantel every time.
Now the honesty. Buyers report the leveling is fussy: one found the mount has to sit dead center, and any offset stops the TV from sitting level. Others say it takes two people to install and that the swivel gives a slight wobble while descending. Neither ruins the result, but neither is a five-minute job. It also needs the cable-management kit and proper HDMI cables to look clean behind a big screen. At 4.5+ stars, reviewers keep calling the smooth glide and one-button memory the real upgrade over manual pull-down mounts.
What earns it the top spot
- Two memory presets lower and swivel the TV automatically at one button press
- 26 inches of vertical travel puts a mantel-mounted screen at seated eye level
- 30-degree left or right swivel aims the picture toward the couch
- RF remote works without pointing, so a hidden receiver is no obstacle
- Safety stops and a swivel clutch keep the screen from hitting the wall or mantel
What to weigh before buying
- Must be installed perfectly centered or the screen won’t level out
- Two people and careful cable planning are needed on install day
- Slight wobble while descending, which the safety stops limit but don’t remove
Reach for this one if: your TV hangs above a mantel and you’re tired of craning up to watch it.
Look elsewhere if: you want a mechanism that hides inside furniture rather than lowering a wall-mounted screen.
2. CABINETIZER Cabinet Lift Model 72
A steel jack that lets one person hang a wall cabinet or lift a heavy TV into place
This is the tool the other picks quietly assume you already own. It’s a steel lift with a 300-pound load capacity that cranks from 9 inches up to 72 inches, with a brake winch that holds the load steady when you let go of the handle. It weighs 100 pounds, so it’s a workshop fixture rather than a pocket tool. The platform is a 12″ x 14″ wooden deck carpeted underneath, and the dolly base is rubber-gripped so it doesn’t scratch cabinets or counters while you work.
The reviews almost all circle the same idea — it lets a solo installer skip the second pair of hands. A 30-year cabinet installer says it removes the overhead strain of hanging large wall cabinets. A cabinetry partner with 25-plus years says it cuts fatigue and injuries on the job. The functionality is what buyers praise most, with build quality close behind. And on the raw spec: its 300-pound capacity is well ahead of the MantelMount MM815’s 115 pounds, so it lifts what a mount alone can’t.
The catch is storage and driving it. The lift breaks down for vehicle transport and reassembles, according to owners, but when it’s together it’s a 100-pound frame that won’t fold into a toolbox. Cranking by hand is slower than the drill option. Watch the sky: 9 inches of clearance under the platform isn’t much, so measure your toe-kick before you buy. A limited lifetime warranty covers the steel if anything gives out.
The honest read: buy this if you install cabinets or mount heavy screens for a living and want to work alone. Owners mention it pays for itself after a few cabinet jobs by replacing a hired second set of hands.
Skip the add-on: the optional Drilldrive sounds quick, but one owner snapped a bolt trying to run the lift on drill power and warns against it — stick with the hand crank or confirmed accessories.
Best for: pros and serious DIYers mounting cabinets or lifting the TV into its enclosure.
Not for: anyone who wants the screen to move by remote every night.
3. ONKRON TS1881E-B Motorized TV Stand
A wheeled cart that rolls a 200-pound screen between rooms and raises it on command
If your screen needs to travel, this is the one. The TS1881E-B takes screens from 50″ to 86″ up to 200 pounds and rolls on lockable casters between rooms or onto a patio. Its VESA range runs from 200×200 to 800×500, so the bolt pattern on nearly any large TV fits. The hand-built column buttons let you adjust height without hunting for the remote. Two shelves hold laptops or media players, and the upper one can carry a webcam for video calls.
Tall screens want headroom. The motor raises and lowers the TV within an 11.9-inch band, from 53.1 inches up to 65 inches, and the remote reaches 16.5 feet away. The 200-pound capacity outranks the MantelMount MM815’s 115 pounds, so a heavier display is fine. Taller screens and a wider screen range are also where the ONKRON stretches past the MantelMount on paper. A five-year warranty backs it.
Assembly is the weak point. The instructions run confusing enough that buyers had to redo steps, and the two shelves feel flimsy. A small share of units arrive with a broken lift, and the pop-locking beads behind the TV still need a physical press to raise or lower despite the remote. Its rating is low, so test the lift before you finish the build. Do that and you get a sturdy rolling stand that holds a 75″ set without wobbling.
Where it shines: moving a big screen is the whole point — one owner ran it from a 4K monitor setup to a backyard patio for a Super Bowl party. Cable channels inside the column keep the wires out of the way while it rolls.
Reach for this if: the TV needs to go from room to room, or to trade-show floors and classrooms.
Think twice if: you want a fixed, tidy living-room install — this one rolls and needs floor space.
4. Touchstone Valueline 30009 Swivel Motorized Lift
A lift that raises the TV out of a cabinet top and spins it a full 360 degrees
The 30009 is for the room where the TV should vanish. It mounts a 26″ to 50″ screen inside a cabinet, counter, boat console, or RV, then raises it through a flat-top lid on a 28-inch travel. It carries up to 120 pounds and swivels the full 360 degrees, so the screen faces any seat in the room. The flat lid mount is 17 3/4 x 4 5/16 inches, and the “C” bracket gives 6 5/8 inches of height flexibility beyond the base mounting.
This is the little brother in Touchstone’s line — it tops out at 50 inches where the bigger 30010 reaches 70 inches and the Whisper Ride takes 75-inch screens. The soft start and stop keep the motion clean, and a wired remote shows your exact lift height so memory settings land where you set them. Alexa and Google Home voice commands work for raising the TV, though one owner found the initial app setup fiddly and had to build “scenes” in the Tuya app before routines ran. A 5-year warranty covers the mechanism.
Two caution flags from the reviews. One unit arrived with a lift that crept up on its own and wouldn’t answer the remote, and had to go back — so test the mechanism before you cut a hole in your cabinet. Another found the memory function disabled and had to hold the button through the whole roughly 30-second travel. These are not the common experience, but they’re why you plug it in first.
Why the cabinet crowd likes it
- 360-degree swivel aims the TV toward any seat
- Raises 28 inches through a flat-top lid for a flush counter install
- Voice control through Alexa and Google Home plus a wired height display
- 5-year warranty on the mechanism
The limits worth knowing
- Only fits screens up to 50 inches, so no go on a big living-room set
- The app setup for voice control takes some patience
- Test the unit before assembly — a rare unit arrives with a faulty lift
Best fit: the kitchen, RV, or boat where a 26″–50″ TV should hide under a lid that matches the counter.
Pass if: your living-room screen is bigger than 50 inches or you need a drop-down mount.
5. Whisper Ride 1000 Motorized TV Lift
Danish-engineered lift with the long travel that hides a 75-inch TV in your furniture
It uses a rack-and-pinion motor, which is a geared track that moves the TV quietly instead of with a belt. It mounts in a cabinet, on a wall, or from the ceiling, and fits VESA 600×400 down through 200×100. The mechanism can also be inverted with a 65-pound capacity to lower a screen from above.
Owners rave about the build quality, and the rack-and-pinion mechanism backs it up. The built-in reverse function stops the lift the moment it meets an obstruction while lowering, backs up two inches, then shuts off. That’s a real safeguard if a cabinet door or a hand is in the way. A 5-year warranty covers the electronics and metal, and support gets praise for fast email and callback help. The kit includes a lid lifter, an RF remote, a manual rocker switch, and mounting brackets.
The weak spot is the paperwork, not the hardware. A pair of owners call the instructions anemic and poorly written, and one struggled to secure the TV to the horizontal brackets. This is a lift a cabinet installer will be comfortable with and a first-timer may need help with. Measure your cabinet’s inside height before you order, because 39.4 inches of travel needs the open space to spend it in.
Why the pros pick it: a 39.4-inch drop fits tall cabinets that shorter lifts miss, and the rack-and-pinion motor keeps it quiet enough to forget it’s moving.
The caveat: budget an install helper — the instructions are the weak link, and the hardware is not.
Choose this if: you’re building furniture around a screen up to 75 inches and want the longest travel here.
Look past it if: you need unusually clear, easy instructions or a small form factor.
6. Touchstone Valueline 30010 Swivel Motorized Lift
The bigger Touchstone: 39 inches of travel and a 70-inch ceiling for your screen
Step up from the 30009 and you get a 39-inch travel instead of 28, plus support for screens from 32″ to 70 inches. Capacity holds at 120 pounds, and the 360-degree swivel still turns the whole way around. The flat-top lid mount runs 17 3/4 x 4 5/16 inches, and the “C” bracket again gives 6 5/8 inches of height flexibility. That combination is why it works in a kitchen island, an RV, or a boat where the screen has to climb high and vanish flush.
The 39 inches of travel matches the Whisper Ride 1000’s travel, though at a lower 120-pound capacity. In a small room the swivel does the real work. As one owner put it, “this stand gives us versatility in a small room.” The soft start and stop keep the motion tidy, and the wired remote shows your lift height for exact memory settings. It comes with a flush-top lid for wood, ceramic, marble, or drywall counters, and Alexa plus Google Home handle voice commands. A 5-year warranty covers the mechanism.
Be careful with the travel spec against your ceiling. Forty inches of lift needs clearance above the cabinet. For the drop-down rather than the up-from-cabinet job, you want the MantelMount or the Mount-It! instead. This one raises the screen out of furniture; it doesn’t lower a wall-mounted TV. Order the screen size correctly too — this tops out at 70 inches, not the 75 of the Whisper Ride.
The short version: if your cabinet has tall headroom and your TV is between 32 and 70 inches, this hides it with 39 inches of clean travel and a swivel that serves the whole room.
Match this to: a kitchen or living-room cabinet with headroom to spare and a mid-size screen.
Choose another type if: your TV already hangs on a wall and needs to come down, not rise up.
7. Mount-It! Motorized Fireplace TV Wall Mount
The recessed mount that lowers your fireplace TV and sits flush to the wall when up
This mount hides itself in the wall. The recessed base conceals the lifting arm so the TV sits nearly flat against the wall at the top position, with a 1.65-inch profile. It lowers the screen 24.8 inches to a comfortable height on a button press. It fits 42″ to 80″ screens up to 110 pounds, and works with VESA patterns from 200×200 up to 600×400. It’s solid steel with gas springs on the lifting arm and covers the whole range of 42, 47, 50, 55, 58, 60, 65, 70, 75, and 80-inch sizes.
Here’s the difference from the MantelMount MM815: the Mount-It! goes in the wall, between 16-inch studs, so the TV ends up flush, while the MM815 hangs on the outside of the wall. The Mount-It! carries 110 pounds against the MantelMount’s 115, so almost even there, and it fits a wider screen range at the top end, 80 inches versus 90 on the MantelMount — the MantelMount reaches bigger screens. It needs a 60-inch or larger TV to fully cover the recessed box when raised, and the included vertical VESA extension brackets let you mount lower to hide the box.
The finish is where the reviews divide. Owners describe the motor as sturdy, but several note a wobble at the top when the TV reaches full height, and a couple say the recessed box stays visible behind smaller screens. One calls the motion jerky with no soft close and no memory preset, requiring you to hold the button. It’s a lot of work to install — you’re cutting a large opening in the wall. Budget the labor and the drywall repair.
Strong points
- Flush 1.65-inch profile when raised, so the TV sits close to the wall
- 24.8 inches of drop brings the screen to a seated viewing height
- Lifetime warranty and US-based support
- Fits screens from 42 to 80 inches across common VESA patterns
Real downsides
- Slight wobble at the top of travel on large TVs
- No memory preset — you hold the button through the whole move
- Requires cutting a large in-wall opening between studs
Best for: a finished room where the TV must sit perfectly flush above the mantel when up.
skip it if: you can’t cut into the wall or you want a one-button memory drop.
Know the Specs
Vertical travel
This is how far the screen moves up or down, and it’s the number that decides your viewing comfort. A lift with 39 inches of travel can pull a screen from high in a cabinet down or up to where you sit; a 24-inch drop may only bring a high mantel TV partway. Measure the gap between your current viewing height and seated eye level before you buy.
VESA pattern
VESA is the standard grid of bolt holes on the back of your TV, written as width by height, like 400×400 or 800×500. Your mount must list a pattern that matches your TV, or the bracket won’t bolt on no matter what the screen-size range says. Check the pattern on your TV’s spec sheet; it’s the single most common reason a mount gets returned.
Weight capacity
This is how much the lift or mount can hold, and it needs to clear your TV’s weight with room to spare. A 200-pound stand carries a heavy large screen; a 110-pound mount covers lighter sets. Add the weight of any soundbar or bracket, and stay well under the listed limit so the motor isn’t working at its ceiling.
Swivel and drop-down type
Swivel turns the screen left or right, useful in a small room where seats sit off to the side. A 360-degree swivel faces any seat; a 30-degree swivel aims toward the couch. The mount type matters too: a drop-down mount lowers a wall-mounted TV, while a cabinet lift raises a screen out of furniture. Pick the type that fits the room before the swivel range.
Common Questions
Will a TV lift cabinet work with my existing TV?
What is the difference between a drop-down mount and a cabinet lift?
How much travel do I need to fix a fireplace TV?
Do these lifts need a specific wall or cabinet opening?
Can I control a TV lift with Alexa or Google Home?
What happens if the lift hits something while moving?
How much weight can these mounts and lifts hold?
How long is the warranty on these lifts?
Can a motorized lift really hide a 75-inch TV?
Does the lift have a memory preset for favorite heights?
The Bottom Line
For most people with a TV above the fireplace, the MantelMount MM815 is the pick: two memory presets drop and swivel the screen on one button, and 26 inches of travel brings it to eye level. If you’re building furniture and need a screen to vanish inside it, grab the Whisper Ride 1000 for its 39.4-inch travel and 75-inch reach. Just need the TV lifted into place during the job? The CABINETIZER Model 72 does the heavy lifting that the mounts can’t. Whichever you pick, verify the VESA pattern and the travel distance against your room first — those two numbers make or break the whole install.
How we choose
We do not accept paid placement. Every pick is matched to a real buyer and a real use-case; we do not hands-on test units.
Sources
Specifications: manufacturer listings and product documentation. Review insights: verified customer reviews, as of October 2026. Pricing: not shown on this page (it changes often); check the current price via the retailer link.
As an Amazon Associate, Aappliancez earns from qualifying purchases. This does not affect which products we feature.