Disclosure: Some links in this post are affiliate links. As an Amazon Associate I earn from qualifying purchases, at no extra cost to you. Learn more
Specs are compiled from manufacturer listings and verified buyer reviews and can change over time — please confirm the key details on the product page before buying.
You want lights that stay up, look good from the street, and don’t ask you to haul out the ladder every December. The catch is that under-eave lighting lives in the harshest spot on your house — full sun, driving rain, and temperature swings — so the thing that separates a smart buy from a regret is durability, not color count. This guide walks you through the specs that actually predict whether a set survives its second winter, and picks the seven sets worth your attention.
This guide is built by comparing the manufacturers’ published specifications and the patterns across verified customer reviews, so you get each pick’s real strengths and trade-offs instead of marketing spin.
Permanent eave lights only pay off when they outlast the seasons, so the specs below focus on waterproof ratings, expandability, and real mounting hardware. That framing is exactly how this list of under eave lights was chosen.
Top Picks
How To Choose The Best Under Eave Lights
The eave is the hardest working spot on your exterior — it takes direct sun, gutter splash, and freeze-thaw cycles all year. So the first question isn’t “how many colors,” it’s “will this thing still turn on next spring?” Everything else follows from there.
Waterproofing: The Rating That Decides Everything
Look for an IP rating (Ingress Protection — a two-digit score for dust and water resistance). IP67 means the light itself can sit in rain without water getting in, while IP65 covers splashes and spray. Some sets pair an IP67 light string with an IP65 control box, which is why the adapter and controller often need to sit under cover. If your outlet is exposed, that difference matters more than any color preset.
Brightness and Beam Angle: What “Wall Washing” Really Means
Lumens measure how much light each head throws, and the beam angle decides how far that light spreads up the wall. A narrow beam concentrates the glow into a defined cone; a wide beam spreads it softer and wider. Also check how far down the wall the light reaches — a shallow wash can leave the siding below the fixture in shadow.
Control: Wi-Fi vs Bluetooth vs Remote
Wi-Fi control lets you schedule and adjust lights from anywhere in the house, and it survives a trip out of range. Bluetooth keeps the connection local, so it works fine on the patio but drops off as you walk away. A physical remote or button is the quiet hero — it still works when the app is glitchy or your phone is charging.
Strand Spacing, Length, and Expansion
Spacing between lights decides whether you get an even ribbon or a dotted line of bright spots. Length matters less than how the strands connect — some sets link together for longer runs, and some cannot be extended at all, meaning a long roofline needs a second full kit. Measure your run and check the connector situation before you buy.
Side-by-Side Comparison
| Model | Best For | Length | Waterproofing | Control | Amazon |
|---|---|---|---|---|---|
| Nexillumi 100ft Smart RGB LED Lights★ Best Overall | Colorful daily curb appeal | 100 feet | IP67 | App & Remote | Amazon |
| APPECK 50FT with 36 LEDsBest Value | Short runs and small eaves | 50 feet | IP65 | App, Remote & Voice | Amazon |
| KSIPZE 100ft Smart RGB+IC Eaves Lights | Balanced price and control | 100 feet | IP67 / IP65 box | App & Button | Amazon |
| Bonve Pet 100FT Smart Eave Lights | Quick peel-and-stick setup | 100 feet | IP67 | App & Remote | Amazon |
| Enbrighten Eternity 100ft, 72 Lights | Expanding and trimming a setup | 100 feet | IP65 | App & Voice | Amazon |
| ASAHOM Permanent Outdoor Lights Pro | Large and complex rooflines | 100 feet | IP67 | App & Voice | Amazon |
| LITSOUL 400FT Waterproof Eave LED Lighting | Very long continuous runs | 400 feet | IP67 | App & Push Button | Amazon |
Detailed Reviews
1. Nexillumi Permanent Outdoor Lights 100ft
The set that swaps holiday hanging for a single weekend on the ladder
If you hate unpacking a tangled bin of string lights every November, this is your exit ramp. You mount 100 feet of linear strip once along the eave, wire it into the app or the included remote, and then change the whole house from your phone when the season swings.
The weatherproofing is the real story here. The full IP67 rating covers the strip, the power adapter, and the control box — the three pieces that usually corrode first. The strip is rated for up to 50,000 hours and -22°F to 140°F, covering both a midwest freeze and a Texas summer. Each LED throws up to 100 lumens, which the brand describes as 3X the brightness of a typical set.
Colors and control are where buyers split. The app and remote open up 16 million DIY colors, 9 preset scenes, and a music-sync mode, and the everyday warm white runs from 2700K to 6500K — useful when you want a porch glow rather than a party. The catch: review pages include a strand that stopped turning on within a year and comments that the white reads pinkish. Cap the brightness expectation at “cozy,” not “holiday display.”
Where it stands out
- Full IP67 rating across the strip, adapter, and control box — the parts that normally fail first
- Up to 100 lumens per LED, roughly 3X the brightness of a basic set
- 100 feet delivered as two 50ft strips so you can split the run across a corner
- Rated for -22°F to 140°F, covering most of the country’s worst weather
Where it asks for patience
- Adhesive install goes fast; the screw kit eats a whole afternoon
- The white tone leans warm-pink rather than clean, so expect compromise on the neutral setting
- Long-term reliability draws mixed feedback across the review pages
Reach for this if: you want one install that covers both holiday color and everyday warm-white lighting without buying extra hardware.
Measure first though: the total reach from wall outlet to the strip’s first light is 8.2 feet, so confirm your nearest outlet is that close.
2. APPECK Permanent Outdoor Lights 50FT
The only set here with a dedicated white LED alongside the color ones
Coverage is the trade-off to understand up front. This one runs 50 feet with 36 LEDs — about half the length of the 100-foot sets on this list — so it suits a garage front, a porch beam, or one side of a small house rather than a full wrap. If your roofline stretches longer than that, plan on two kits, and note that multiple sets cannot be linked together, so each one needs its own outlet and its own app entry.
The reason it earns a spot is the RGB+WW lens. That WW means warm white gets its own dedicated LED, not a blended approximation from red, green, and blue. It reaches 2700K and up to 40 lumens per light, so the everyday setting reads like a real porch light instead of a colored bulb pretending to be white. Color brightness tops out at 25 lumens per light, and the beam angle reaches up to 105° with a wall wash of up to 16 inches.
Control is flexible for the size. It works with the Smart Life app, voice through Amazon Alexa and Google Assistant, plus a physical remote and a control box button — helpful on a night when the app stalls. Do bear in mind the 2.4GHz Wi-Fi requirement; a 5GHz-only network will not connect. Buyers report the pinkish-neutral issue shows up elsewhere in this category, but here the dedicated white LED is the fix, so the warm setting is the part owners consistently praise.
Why the short length pays off: because the whole run is 50 feet, the beam angle and 40-lumen white cover a concentrated area more evenly than a stretched 100ft set on a short wall.
The setup reality: the adhesive needs a flat, clean surface and firm pressure on each bead, so textured siding may force you into the clip-and-screw route.
Suits short, defined runs: a garage front or porch where 50 feet is genuinely enough and you want a proper warm white.
Look elsewhere if: you need to wrap an entire long roofline, since these strands cannot be joined.
3. KSIPZE Permanent Outdoor Lights 100ft
A wall-washing beam that punches deeper than almost anything else here
If you have ever installed a light strip and watched it cast a thin stripe instead of a glow, the lens design here is the answer. KSIPZE builds a signature triangular beam that reaches more than 20 inches down the wall, which is roughly a quarter deeper than the 16-inch wash you get from the APPECK set above. That extra depth is why a 100-foot run on this set reads as one continuous ribbon rather than a line of bright dots.
Durability lands split across two ratings, and that detail matters at the outlet. The light string itself carries IP67, meaning it can take direct rain, while the control box is rated IP65 for splash and spray — so mount the box under cover near the eave. The manufacturer leans on UV-resistant materials and describes the set as built for rain, snow, heat, and cold year-round.
Control splits into a phone-first and a phone-free option. The app serves up 16 million colors and 200 preset scene modes, and a physical button controller covers the moments when you just want to change the mode without fishing for your phone. Two consistent gripes show up across the review pages: the app has an awkward first-run curve — it worked fine on one buyer’s Samsung and refused to load on their iPhone — and the strands cannot be linked together, so a longer roofline means buying a second full set rather than extending the first.
What earns the pick
- Over 20 inches of wall wash — deeper beam coverage than the shorter-wash sets
- 200 preset scenes plus a physical button for when the app is slow
- IP67 light string built for direct rain exposure
- 100 feet ships as two 50ft strands for corner layouts
Set your expectations
- Control box is only IP65, so it needs shelter under the eave
- Strands cannot be chained, so long runs require a second kit
- App compatibility varies by phone and takes a few minutes to learn
Go with this for: a single 100-foot run where the wall-wash depth is the point and you want a physical button as a backup.
Skip if: your roofline needs chaining, since these strands do not extend.
4. Bonve Pet Permanent Outdoor Lights 100FT
Peel-and-stick install that puts color on the eave in an afternoon
The install story is the reason to consider this one. You get a strong adhesive backing with clips and screws as a fallback, so a single person can run 100 feet of RGB lighting along the eave without a helper. The app then handles brightness, speed, schedule, and color, and there is a remote included for the moments you cannot be bothered opening the phone.
The set carries an IP67 waterproof rating, UV-resistant materials, a -4°F to 140°F working range, and up to 50,000 hours of life. The listed colors run to 16 million, blending RGB with cool white. Note that the control box and adapter still need sheltered placement — the brand asks for installation under eaves — so the adapter is not rated as exposed as the light itself.
The single-color limitation trips people up, and the listing says so directly. This is the basic version, which can only display one color at a time across the entire strand. So a red-white-blue July display is impossible — the whole line shows red, then switches to white, then blue, in sequence. Some owners mention a strand quitting within the first month or two, and replacing a mounted run means climbing the ladder again. Customers note one set dead on arrival and others failing at 5 and 7 months.
The hard truth about color: 16 million colors sounds vast, but the per-strand limitation means you are picking one hue for the whole roofline at a time, not painting each section differently.
Install upside: the adhesive route genuinely works, and it saves the screw-by-screw labor a heavier kit demands — just clean the surface first.
Ideal for: a first permanent install where one color at a time is fine and setup speed matters more than per-light control.
The catch: replacing a failed strand means a re-climb, and some buyers face that within the first few months.
5. Enbrighten Eternity Permanent Outdoor Lights 100ft
Snap-in pucks you can trim and extend to fit an awkward roofline
Flexibility is the pitch, and it shows in the kit. You get six 16.5-foot strands — 72 LEDs in total — plus mounting brackets, 3M VHB tape, screws, cord clips, a power supply, and a 10-foot extension cable. Snap a strand into the brackets, link up to 200 feet, or cut a section to fit a shorter eave without leaving a dangling length of useless cable.
Control runs over 2.4GHz Wi-Fi through the manufacturer’s app, and it works with Amazon Alexa and Google Home for voice commands. Colors come from RGBWIC LEDs — the “WIC” stands for a dedicated white and an individually addressable chip, so you get millions of colors plus an adjustable white for matching your existing porch bulbs. The white has three tones and dims, which is more fine control than the single-tone sets on this list.
The build quality earns the top mark of the mainstream picks. Replacement clip-in pucks mean a single failed light does not kill the whole strand, and the set carries ETL and NEC compliance — real safety certifications for a permanent exterior install. The trade-offs are specific: the cable between lights runs a visible route the listing acknowledges looks slightly unprofessional on some walls, and the connectivity assumes a solid Wi-Fi signal at the install point. There is a 1.38-foot puck spacing, so the lights read as an even line rather than a sparse dotted run.
Why the modularity matters: with six separate 16.5-foot strands and a cut-and-link design, you can outfit a 200-foot perimeter without ordering five kits or leaving dead lights hidden in a gutter.
A quiet bonus: because the lights snap into replaceable brackets, a mid-season failure is a fifteen-minute swap instead of a re-install.
Built for: complex or long rooflines where you need to link, cut, and fine-tune the layout.
Weigh the visible cable: if a clean, invisible run between lights is a priority, the exposed connector lead may bug you.
6. ASAHOM Permanent Outdoor Lights Pro 100FT
The professional-grade kit that treats your roofline like a lighting rig
If your house has peaks, dormers, and a wraparound porch, most kits come up short because they only ship as one or two long strands. ASAHOM solves that with a modular system: four 5-meter string sections, three 2.5-meter sections, one 1.25-meter section, and three single-LED sections, plus six extension cords of varying lengths and a T-splitter for branching. That is genuinely unusual flexibility — you can run a clean line down a gable, split at the peak, and cut a section to fit without wasting lights.
The lighting stats match the ambition. The 72 RGBCW LEDs total 5,040 lumens, the apex of what you’ll find here and roughly 3X what a basic 100-lumen-per-light set can output. The detachable base tilts 10°, and ASAHOM claims the wall-washing effect is 50% higher than a flat-mounted design at the same lumen output, which translates to a wider, brighter pool of light on the siding. That claim is the manufacturer’s, but the tilt geometry does direct light up the wall more directly than a flat bead.
The controls set this apart from the pack. WLED integration is rare in eave lights — it means advanced DIY customization and connectivity to the broader WLED ecosystem, which some enthusiasts already use for smart home control. You get 289 palettes, 142 effects, 30,000 dynamic combinations, and an external antenna plus an Ethernet port for a lag-free wired connection. The trade-offs are the price tier and the size — at 78 mounting bases, this is a substantial install. It is IP67 rated and runs -22°F to 113°F, and it extends to 800 feet with cut-and-splice.
Why the pros pick it
- 5,040 total lumens — the highest output on this list
- WLED integration with a broader control ecosystem
- Extends to 800ft with cut-and-splice sections for full-perimeter coverage
- External antenna and Ethernet port for wired, lag-free control
The honest trade-offs
- 78 mounting bases and dozens of accessories make this a weekend job, not an afternoon
- WLED setup is genuinely advanced — not for a plug-and-play buyer
- Per-module replacement promise means the ecosystem is locked to ASAHOM parts
Reserved for: smart-home enthusiasts and complex rooflines where 800-foot expansion, WLED, and 5,040 lumens are worth the extra setup work.
Not for: a simple straight run where a plug-and-play 100-foot set finishes the job in an hour.
7. LITSOUL Permanent Outdoor Lights 400FT
The longest single run here — if your spacing expectations are patient
The draw is simple arithmetic: 400 feet in one kit. Most homes here top out at 100 feet, and even the expandable sets ask you to buy several hundred feet of hardware to reach this length. The manufacturer targets larger builds where you’d otherwise chain four basic sets. For that reason alone it belongs on the list for anyone with a genuinely enormous roofline.
The feature list is competitive on paper. Each LED puts out up to 100 lumens, and the white range spans 2700K to 6500K so you get warm and cool options in a single set. The system uses the “Lotus Lantern” app or the included remote, with 29 preset scenes and a music-sync mode. Durability claims IP67 waterproofing, UV resistance, a -22°F to 140°F operating range, and up to 50,000 hours.
Now the part every buyer needs to hear before ordering 400 feet of light. The spacing between lights lands at a claimed 2 feet apart on some installs, and that wide gap is the single most common complaint on this listing. Multiple reviews call out the sparse look specifically, and the spread turns what should be a continuous ribbon into a punctuated line. Buying a longer run only makes the problem more visible, since the gaps repeat across more of your house. Reviewers point out spacing complaints directly, and durability concerns also surface.
Where it delivers: a single 400-foot run with a built-in timer that turns lights on at night and off during the day without any daily input — useful when the light is out of reach.
Where it asks you to compromise: the sparse spacing means you are committing 400 feet of pale, dotted light to your house, not a continuous wash.
Only for: massive single-run builds where 400 feet of continuous coverage outweighs the visual spacing trade-off.
Look at the shorter sets first if: a dense, continuous glow is what you actually want to see at night.
Know the Specs
IP Rating: The Two-Digit Score That Predicts Survival
IP stands for Ingress Protection — the first digit covers dust and solid objects, the second covers water. IP67 means the light itself can be submerged briefly and survives rain, splashes, and hose spray. IP65 covers splashes but not continuous exposure. An IP67 light string paired with an IP65 control box is a common combination — the light can handle the weather, but the adapter and controller still want shelter under the eave. For an exposed outlet, IP67 across every component is safer.
Lumens, Beam Angle, and Wall Wash Depth
Lumens measure how much light each fixture throws. Higher lumens mean brighter output, but brightness alone does not create the glow most buyers picture. Beam angle decides how wide the light spreads, and wall-wash depth measures how far down the wall it reaches. A shallow wash casts a thin stripe near the eave; a deeper wash reaches 16 to 20 inches down, which is what makes the light appear to wrap the siding rather than sit as a single line of dots.
Linkability and Strand Count
Length on the box and length on the house are two different things. A 100-foot set with one continuous strand covers 100 feet, but a 100-foot set built from shorter snap-in strands lets you route around a corner, cut a section to fit, or link additional runs to 200 feet. If your roofline needs no extension, this does not matter. If it does, the connector option matters more than the headline length.
Control Method and Wi-Fi Band
Wi-Fi control schedules and automates the lights from anywhere; Bluetooth keeps the control local to your patio. The critical spec here is the Wi-Fi band — a 2.4GHz connection is what permanent fixtures need, and a 5GHz-only network will not connect, no matter what the app says. Many kits also ship with a remote or physical button, which is the backstop when the app stalls or your phone is dead.
Common Questions
Will under eave lights survive a Midwest winter with snow and freeze-thaw cycles?
Do I need to mount eave lights under the eave specifically, or can they go on the fascia?
How long should permanent eave lights actually last before needing replacement?
Can I link multiple strands of under eave lights to cover a longer roofline?
Do smart eave lights work with 5GHz Wi-Fi or only 2.4GHz?
What is the difference between IP65 and IP67 for outdoor lights?
How much wall wash depth do I need to light up siding below the eaves?
Should I install permanent eave lights with adhesive or screws?
Will permanent eave lights work with Amazon Alexa or Google Home?
The Bottom Line
For most homes, the under eave lights winner is the Nexillumi 100ft Smart RGB LED Lights because the full IP67 waterproofing covers the strip, the adapter, and the control box — the three parts that fail first when the weather turns. If you need the ability to link, cut, and trim a complex roofline, grab the Enbrighten Eternity. And for the largest roofline where one continuous kit is the priority, the LITSOUL 400FT is the one to reach for.
One buying nudge: the Nexillumi kit sits at 100 feet with two 50-foot strands and a full weatherproof package across every component. If you have been putting off a permanent install because the ladder work is the blocker, this is the one worth committing to.
How we choose
We do not accept paid placement. Every pick is matched to a real buyer and a real use-case; we do not hands-on test units.
Sources
Specifications: manufacturer listings and product documentation. Review insights: verified customer reviews, as of October 2026. Pricing: not shown on this page (it changes often); check the current price via the retailer link.
As an Amazon Associate, Aappliancez earns from qualifying purchases. This does not affect which products we feature.